The package consists of 25 Bosta 100 horizontal frames.
The Bosta 100 horizontal frames are placed on top of the U-profile of the vertical frame and the horizontal frame planks are placed inside of it.
The package consists of 100 steel planks.
The Bosta 70 steel plank with a load capacity of 2 kN/m2 and load class 3 is extremely sturdy with non-slip surface. Two hot-dip galvanised steel planks form the deck of a scaffold bay.
The package consists of:
10 pcs
135770
Bridge girder
750
Lower chord tubing 48.3 mm, upper chord U-profile. To bridge spans up to 7.50 m. Bolt to vertical frame with weld-on half-coupler.It fit's to system BOSTA, as well as to all other scalolding systens, which are using tubes 48,3 mm diameter.
The package consists of 50 frame decks.
The Bosta 70 alu frame deck with a load capacity of 2 kN/m2 and load class 3 is an extremely lightweight frame deck with exchangeable planks. It is a aluminium-plywood design.
The package consists of:
135780
Bridge girder
500
10 pcs
Lower chord tubing 48,3 mm, upper chord U-profile. To bridge spans up to 5.00 m. Bolt to vertical frame with weld-on half-coupler.Fit's to BOSTA 70 system, as well as to any other system, which is using 48,3mm tubes.
The package consists of 20 working brackets .
The Bosta 100 working bracket is hinged, for cantilevered safety roof, 1.65 m wide. It is fastened with a M8 x 80 bolt and nut on top. With a half coupler it is attached to the vertical frame below.
