Hünnebeck's CS 240 L climbing scaffold is a crane-mounted mobile scaffold used both as a support scaffold in accordance with DIN 4421 for supporting wall formwork and as a working and protective scaffold in accordance with DIN 4420 Part 1 for reinforcement, concrete, and curing work. The steel structure is fully hot-dip galvanized. The project-specific assembly of scaffold units ensures a high degree of adaptability to specific structures. The wall formworks are connected to the bracket scaffold to form complete, crane-movable units. A retraction device on the CS 240 L allows the formwork to be lowered by up to 83 cm, depending on the formwork type. A tilting device allows for the formwork to be folded down. Any required concrete surface can be achieved using either frame formwork or timber-beam wall formwork. Depending on the scaffold width, it can be used at heights greater than 100 m above ground level and allows a maximum formwork height of 5.40 m. Offered here are:One main platform – 5,0 m wide – consisting of two brackets  Formwork and pouring height is 3.9m A leg platform  Rollback & Formwork Support Necessary accessories. pos. item No. description item       Total 1 600563 SCREW SET CS 240 2 2 2488 Half Coupler 48/M20x30 W.A.F. 22/ W.A.F. 30 8 3 2525 Swivel coupler 48/48 waf22 3 4 169078 TUBO d.48.3/3.25 L=400cm EP zinc 5 5 452053 WALER SPANNER 18 6 20492 TIE NUT 85 18 7 503919 STEEL WALER F 196 6 8 600378 WORKING PLATFORM BEAM CPL. 2 9 600320 VERTICAL BEAM, CPL. 2 10 600311 GUARD RAIL POST, CPL. 2 11 600304 DIAGONAL, CPL. 2 12 600563 SCREW SET CS 240 2 13 600390 WIND LOAD SEC. DEVICE, CPL. 2 14 600368 U 120 FORMWORK BEAM 370 CPL. 2 15 600295 SPINDLE 2 16 600344 LEVELLING ADAPTOR CPL. 2 17 600327 MOVE-OFF CARRIAGE CSL, CPL. 2 18 600365 DETACHABLE ADJUSTING UNIT 2 19 600313 VERTICAL EXTENSION BEAM, CPL. 2 20 600309 SUSPENSION PROFILE, CPL. 2 21 600310 EXTENSION SUSP. PROFILE CPL. 2 22 600306 TRAILING PLATFORM, CPL. 2 The following must be added on site: H20 beams for the platformsWooden decking for the platforms Additional edge protection For additional information please go to: CS 240 climbing scaffold | Hünnebeck

The intelligent alternative to traditional wooden construction  › Can be used as a staircase, walkway, or ladder: Versatile applications – e.g., for embankments, excavations, excavations, or for bridging gaps and openings.  › Modular & flexible: Adaptable thanks to variable angles, combinable stair lengths (e.g., 18+18 or 15+12 steps), and versatile applications.  › Wide inclination range: Continuously adjustable from 0° to 50° – ideal for a wide variety of terrain and construction situations.  › Fast, safe assembly: Thanks to the integrated folding mechanism and automatic step leveling.  › Reusable & mobile: The staircase can be flexibly relocated and used multiple times – ideal for changing locations on the construction site.

One of the most universally used shoring system in the industry. Consist of: Item Code Item Description Number 201JX14 U-HEAD 8-1/4"X14" 152 203C FRAME 5'H X 4'W 54 203D FRAME 6'H X 4'W 54 204A SPROCKET (20K STEEL) 152 204E CONN. PIN (HINGED SOLID) 456 217C FRAME 5'H X 2'W 24 217D FRAME 6'H X 2'W 20 06E 5'x6' Pivoted Cross Brace 152 201A BASE PLATE 152 202E 12" 20k Adjustable Leg 304 Capacities up to 20,000 lbs. ( 9,072 kg ) per frame with up to 40,000 lbs. (18,144 kg) capacity on shoring towers. Prefabricated, easily assembled components provide support for slabs, beams and other horizontal formwork. High capacity, lightweight frames, reduce labor costs Compatible with the full range of Aluma beams and stringers Full list of accessories & components Application Shoring & Re-Shoring applications Heavy slab shoring applications Various forming applications Commercial Applications Industrial Applications Infrastructure Applications   For further Information please visit our website: 20KA Shoring System | Aluma Systems

One of the most universally used shoring system in the industry. Consist of: Item Code Item Description Number 201AS BASE PLATE 6"X8"X3/8" (SWIVEL) 152 201JX8 U-HEAD 8-1/4"X8" 152 203CH FRAME 5'H X 4'W (HEADLOAD) 88 203DH FRAME 6'H X 4'W (HEADLOAD) 20 204A SPROCKET (20K STEEL) 152 204E CONN. PIN (HINGED SOLID) 608 217C FRAME 5'H X 2'W 44 06E 5'x6' Pivoted Cross Brace 152 202E 12" 20k Adjustable Leg 304 Capacities up to 20,000 lbs. ( 9,072 kg ) per frame with up to 40,000 lbs. (18,144 kg) capacity on shoring towers. Prefabricated, easily assembled components provide support for slabs, beams and other horizontal formwork.  High capacity, lightweight frames, reduce labor costs Compatible with the full range of Aluma beams and stringers Full list of accessories & components Application Shoring & Re-Shoring applications Heavy slab shoring applications Various forming applications Commercial Applications Industrial Applications Infrastructure Applications   For further Information please visit our website: 20KA Shoring System | Aluma Systems

One of the most universally used shoring system in the industry. Consist of: Item Code Item Description Number 201PS TOP PLATE (SWIVEL) 108   203C FRAME 5'H X 4'W 108   203E FRAME 3'6"H X 4'W 54   204A SPROCKET (20K STEEL) 216   204E CONN. PIN (HINGED SOLID) 540   06E 5'x6' Pivoted Cross Brace 162   201A BASE PLATE 108   202E 12" 20k Adjustable Leg 216   Capacities up to 20,000 lbs. ( 9,072 kg ) per frame with up to 40,000 lbs. (18,144 kg) capacity on shoring towers. Prefabricated, easily assembled components provide support for slabs, beams and other horizontal formwork. High capacity, lightweight frames, reduce labor costs Compatible with the full range of Aluma beams and stringers Full list of accessories & components Application Shoring & Re-Shoring applications Heavy slab shoring applications Various forming applications Commercial Applications Industrial Applications Infrastructure Applications   For further Information please visit our website: 20KA Shoring System | Aluma Systems

Second-hand package with 12 shoring towers ID15 with a hight of 6,76-7,09 m each consist of:  pos. item No. description item weight       sec. Hand in kg 1 148530 ID 15 head jack 38/52 48 393,600 2 148552 ID 15 base jack 38/52 48 400,224 3 57162 ID 15 frame 133 96 1.809,984 4 57173 ID15 Frame 100 24 381,048 5 118163 ID 15 end frame 10 24 376,080 6 148574 ID 15 Diagonal 120 336,960 7 78652 ID 15 base jack retainer 48 2,448   The Hünnebeck ID15 Frame Support is a support tower system with base dimensions of 1.0 m x 1.0 m. By using only 6 standard components every required height can be achieved. Depending on the height, towers can be assembled with Frames 100, Frames 133 or combinations of these frames and with supplementary components. Towers of any height can be erected without steps utilising the combined adjustment range of the Head Jack and Base Jack, wich exceeds the 33 cm grid of the frames. All component parts are robust and hot-dip galvanized. The self weight including Head and Base Jacks is approximately 42 kg/vertical meter. The bearing plates of the Head and Base Jacks are articulated and allow adaptations to slopes of up to 6%. In total the full adjustment range of the jacks are 59.8 cm. Both Frames (100 and 133) use the same type of diagonal for bracing. When stacking frames on top of each other, the orientation of the standard frames is shifted by 90° from lift to lift ensuring the same rigidity of the ID15 tower in both directions. The connection of the standard frames are tension-proof due to the built-in quick-action connectors. The vertical leg is made of tubular steel with an outside diameter of 48.3mm and therefore allows the connection of standard scaffolding tubes and couplers. When the ID15 Towers are properly horizontally braced and anchored, almost any height can be achieved.   Horizontal assembly The design of the individual components allows the ID15 towers to be assembled in horizontal position. Even tall towers can be assembled quickly and time-savingly this way and then lifted and transported to the location of use by the help of a crane.

INFRA-KIT is a modular construction and heavy-duty shoring system used mainly in infrastructure project applications. To reduce the design and assembly effort in bridge building and cutand- cover tunnel construction, Hünnebeck developed the modular INFRA-KIT system.Common applied heights From 2.5 m up to 10.0 mApplication range Tunnel construction | Bridge and civil construction Heavy slabs | Temporary bridges | Access waysEasy connection of diagonal bracingLoad-bearing frame prop with up to 210 kN load capacity.We always have a large selection of new and used equipment in stock. Tell us what you need, and we'll provide you with a suitable quote. For additional information please go to: INFRA-KIT | Hünnebeck