Climbing Bracket CS240 L
En stock, valeur nette
7 495,00 €*
| Numéro de l'offre: | DE-0826 |
|---|---|
| Lieu de stockage | Germany |
| Condition: | second hand |
Vous n'avez pas trouvé ce que vous cherchiez? Ou préférez-vous louer ?
Contactez-nous pour obtenir un devis personnalisé.Informations sur le produit "Climbing Bracket CS240 L"
Hünnebeck's CS 240 L climbing scaffold is a crane-mounted mobile scaffold used both as a support scaffold in accordance with DIN 4421 for supporting wall formwork and as a working and protective scaffold in accordance with DIN 4420 Part 1 for reinforcement, concrete, and curing work.
The steel structure is fully hot-dip galvanized.
The project-specific assembly of scaffold units ensures a high degree of adaptability to specific structures.
The wall formworks are connected to the bracket scaffold to form complete, crane-movable units. A retraction device on the CS 240 L allows the formwork to be lowered by up to 83 cm, depending on the formwork type. A tilting device allows for the formwork to be folded down.
Any required concrete surface can be achieved using either frame formwork or timber-beam wall formwork.
Depending on the scaffold width, it can be used at heights greater than 100 m above ground level and allows a maximum formwork height of 5.40 m.
Offered here are:
- One main platform – 5,0 m wide – consisting of two brackets
- Formwork and pouring height is 3.9m
- A leg platform
- Rollback & Formwork Support
- Necessary accessories.
|
pos. |
item No. |
description |
item |
|
|
|
|
Total |
|
1 |
600563 |
SCREW SET CS 240 |
2 |
|
2 |
2488 |
Half Coupler 48/M20x30 W.A.F. 22/ W.A.F. 30 |
8 |
|
3 |
2525 |
Swivel coupler 48/48 waf22 |
3 |
|
4 |
169078 |
TUBO d.48.3/3.25 L=400cm EP zinc |
5 |
|
5 |
452053 |
WALER SPANNER |
18 |
|
6 |
20492 |
TIE NUT 85 |
18 |
|
7 |
503919 |
STEEL WALER F 196 |
6 |
|
8 |
600378 |
WORKING PLATFORM BEAM CPL. |
2 |
|
9 |
600320 |
VERTICAL BEAM, CPL. |
2 |
|
10 |
600311 |
GUARD RAIL POST, CPL. |
2 |
|
11 |
600304 |
DIAGONAL, CPL. |
2 |
|
12 |
600563 |
SCREW SET CS 240 |
2 |
|
13 |
600390 |
WIND LOAD SEC. DEVICE, CPL. |
2 |
|
14 |
600368 |
U 120 FORMWORK BEAM 370 CPL. |
2 |
|
15 |
600295 |
SPINDLE |
2 |
|
16 |
600344 |
LEVELLING ADAPTOR CPL. |
2 |
|
17 |
600327 |
MOVE-OFF CARRIAGE CSL, CPL. |
2 |
|
18 |
600365 |
DETACHABLE ADJUSTING UNIT |
2 |
|
19 |
600313 |
VERTICAL EXTENSION BEAM, CPL. |
2 |
|
20 |
600309 |
SUSPENSION PROFILE, CPL. |
2 |
|
21 |
600310 |
EXTENSION SUSP. PROFILE CPL. |
2 |
|
22 |
600306 |
TRAILING PLATFORM, CPL. |
2 |
The following must be added on site:
- H20 beams for the platforms
- Wooden decking for the platforms
- Additional edge protection
For additional information please go to:
CS 240 climbing scaffold | Hünnebeck
En stock, valeur nette
7 495,00 €*
| Numéro de l'offre: | DE-0826 |
|---|---|
| Lieu de stockage | Germany |
| Condition: | second hand |