Hünnebeck's CS 240 L climbing scaffold is a crane-mounted mobile scaffold used both as a support scaffold in accordance with DIN 4421 for supporting wall formwork and as a working and protective scaffold in accordance with DIN 4420 Part 1 for reinforcement, concrete, and curing work. The steel structure is fully hot-dip galvanized. The project-specific assembly of scaffold units ensures a high degree of adaptability to specific structures. The wall formworks are connected to the bracket scaffold to form complete, crane-movable units. A retraction device on the CS 240 L allows the formwork to be lowered by up to 83 cm, depending on the formwork type. A tilting device allows for the formwork to be folded down. Any required concrete surface can be achieved using either frame formwork or timber-beam wall formwork. Depending on the scaffold width, it can be used at heights greater than 100 m above ground level and allows a maximum formwork height of 5.40 m. Offered here are:One main platform – 5,0 m wide – consisting of two brackets  Formwork and pouring height is 3.9m A leg platform  Rollback & Formwork Support Necessary accessories. pos. item No. description item       Total 1 600563 SCREW SET CS 240 2 2 2488 Half Coupler 48/M20x30 W.A.F. 22/ W.A.F. 30 8 3 2525 Swivel coupler 48/48 waf22 3 4 169078 TUBO d.48.3/3.25 L=400cm EP zinc 5 5 452053 WALER SPANNER 18 6 20492 TIE NUT 85 18 7 503919 STEEL WALER F 196 6 8 600378 WORKING PLATFORM BEAM CPL. 2 9 600320 VERTICAL BEAM, CPL. 2 10 600311 GUARD RAIL POST, CPL. 2 11 600304 DIAGONAL, CPL. 2 12 600563 SCREW SET CS 240 2 13 600390 WIND LOAD SEC. DEVICE, CPL. 2 14 600368 U 120 FORMWORK BEAM 370 CPL. 2 15 600295 SPINDLE 2 16 600344 LEVELLING ADAPTOR CPL. 2 17 600327 MOVE-OFF CARRIAGE CSL, CPL. 2 18 600365 DETACHABLE ADJUSTING UNIT 2 19 600313 VERTICAL EXTENSION BEAM, CPL. 2 20 600309 SUSPENSION PROFILE, CPL. 2 21 600310 EXTENSION SUSP. PROFILE CPL. 2 22 600306 TRAILING PLATFORM, CPL. 2 The following must be added on site: H20 beams for the platformsWooden decking for the platforms Additional edge protection For additional information please go to: CS 240 climbing scaffold | Hünnebeck

The Loading Platform 5 800/290 helps to safely transport construction materials on construction sites. It is pre-assembled with minor adjustments possible both horizontally and vertically using the integrated crane attachment points. The Loading Platform is mounted on the outside of the building. The loading area protrudes from the building and offers a safe storage area of approx. 10.00 m2 which can be used to transport materials in and out of the building at floor level. Panel railings that prevent items and persons from falling off the platform ensure a safe working environment when working on the platform. The platform surface is made of slip-resistant corrugate plates.The Loading Platform is used to transport materials on site. It can be used in floors with a clearance of 1.90 m to 5.90 m. It can support up to 5,000 kg distributed across the entire surface.

The TOPMAX Table Lifting System is a modular construction system, which can be adapted quickly and flexibly to the requirements of the building.This system consists of a basic unit (basic frame with drive, control and three-part hoisting cage), single triangle lattice tower elements, pylon ties for the connection to the building, floor gates and connection cables. Load capacity: While movin: 1.685 kg While loading:2.370 kg

MCP 13 jusqu‘à 2009 : 16340€ -  pour 10m de mâts +2500€ -  pour 20m de mâts +4930€ -  pour 30m de mâts +7120€ -  pour 40m de mâts +9620€ - + clôture 1600€ - + par porte palière complète 1020€

L'Alimak MC 450 est la nouvelle génération de plates-formes élévatrices à mât robustes, résistantes et de qualité fournies par Alimak. Ce modèle offre le meilleur rapport performances/qualité pour une utilisation mondiale dans des applications légères et moyennes.L'Alimak MC 450 est utilisé pour transporter des personnes, leurs outils et leurs matériaux vers la zone de travail afin de travailler en toute sécurité et de manière ergonomique, car la machine peut se déplacer entre tous les niveaux de la structure.•    Catégorie de produit : Plateformes élévatrices à mât•    Applications : Travaux de façade sur des projets de construction neuve et de rénovation.•    Certifications : EN1495•    Dimensions : 1,2–2,2 x 4,2–30,2 m (L x l)•    Capacité : 750–5 500 kg•    Vitesse : 8–9,6 m/min.•    Tension : 400 V / 50-60 HzCette offre comprend : Entraînement Article Description Quantité 661207 MC450 Base Unit 9YO 1 661220 Limit Ramp  2 661208 Access Gate 1 661209 Access Step, h’rail 1 661210 Mast Guard  1 661215 Control Panel with Handrail 1 Éléments verticaux 661256 Mast – Single Rack (A) 27 661255 Top Mast 1   Mast Bolts 112 Plateforme   METSA BOARD NEW 1.5 6 661211 1500mm Deck 6   METSA BOARD NEW 0.8 OPTIONAL  661212 800mm Deck OPTIONAL   Deck Pin (DIA.36mm) 21   Deck Slides OPTIONAL 661227 1500mm Handrails 11 661228 800mm Handrails OPTIONAL   STANTION BKT OPTIONAL 661524 End Handrails 2   End Handrail Bracket 4 Ancre 661823 3X2 DOUBLE 10 661216 Tie Bracket (Individual) 10   Drop Tube 10 661243 Tie Foot (MC450) 10  Année de construction : 2016 Vous trouverez de plus amples informations ici :ALIMAK-MC-450-1554-EN-Nov-2021.pdf

L'Alimak MC 450 est la nouvelle génération de plates-formes élévatrices à mât robustes, résistantes et de qualité fournies par Alimak. Ce modèle offre le meilleur rapport performances/qualité pour une utilisation mondiale dans des applications légères et moyennes. L'Alimak MC 450 est utilisé pour transporter des personnes, leurs outils et leurs matériaux vers la zone de travail afin de travailler en toute sécurité et de manière ergonomique, car la machine peut se déplacer entre tous les niveaux de la structure. •    Catégorie de produit : Plateformes élévatrices à mât •    Applications : Travaux de façade sur des projets de construction neuve et de rénovation. •    Certifications : EN1495 •    Dimensions : 1,2–2,2 x 4,2–30,2 m (L x l) •    Capacité : 750–5 500 kg •    Vitesse : 8–9,6 m/min. •    Tension : 400 V / 50-60 Hz Cette offre comprend :   Entraînement Article Description Quantité 661207 MC450 Base Unit 9YO 2 661220 Limit Ramp  4 661208 Access Gate 2 661209 Access Step, h’rail 1 661210 Mast Guard  2 661215 Control Panel with Handrail 1 Éléments verticaux 661256 Mast – Single Rack (A) 54 661255 Top Mast 2   Mast Bolts 224 Plateforme   METSA BOARD NEW 1.5 12 661211 1500mm Deck 12   METSA BOARD NEW 0.8 OPTIONAL 661212 800mm Deck OPTIONAL   Deck Pin (DIA.36mm) 41   Deck Slides OPTIONAL 661227 1500mm Handrails 22 661228 800mm Handrails OPTIONAL   STANTION BKT OPTIONAL 661524 End Handrails 1   End Handrail Bracket 3 Ancre 661823 3X2 DOUBLE 10 661216 Tie Bracket (Individual) 10   Drop Tube 10 661243 Tie Foot (MC450) 10  Année de construction : 2016   Vous trouverez de plus amples informations ici : ALIMAK-MC-450-1554-EN-Nov-2021.pdf

Personnel/Material Hoists for Construction  Commerical High Rise Power Generation Plants Refineries and Chemical Plants Shipyards Technical Datas: ELEVATOR Elevator drive                               Rack-and-pinion Maximum passengers               30 per car Total base unit weight                28,910 lbs (13,113kg) Capacity ...                                   6,000 lbs (2,721kg) per car   CAR/GATES Car weight                                    5,400 lbs (2,450kg) per car Maximum car speed                  300 ft/min (45.72 m/min) Interior dimensions                    12'4" L x 4'8" W x 7'2" H (3.76m L x 1.42m W x 2.18m H) per car Landing gates                               Swing type   TOWER Maximum tower height              900' (274.32m) consult factory for greater lifting heights Dimensions of tower section   56" L x 28" W x 60"H (1.42m L x .71m W x 1.52m H) Weight of tower section            485 lbs (220kg) Wall ties.                                        Adjustable strut 3" - 51" (.076 - 1.30m) Tie in intervals                             30' (9.14 m)   MOTOR/POWER Electrical Motor                           37.5 KVA, 460 VAC, 60 Hz, 3 phase per car Power required                            30 HP (22.5 kW) Motor control                               Full line voltage at start - variable frequency drive available Electrical outlet                           120 VAC Traveling cable                             6/6 - 2 ea- tower height plus 20' (12.19 m) required Base disconnect                         Circuit breaker or fuses in NEMA 4 enclosures Full load current                          37.5 Amps per car   BRAKES Brake                                              Electromechanical multiple disc, spring set Safety overspeed governor       Centrifugally actuated multiple friction disc brake Stopping distance accuracy    ± 6" (± 15.24cm) Brake torque                                 175 ft/lbs   COUNTERWEIGHT Weight of counterweight                5,400 lbs (2,450kg) per car Counterweight wire ropes              5/8" (1.59m) 6 x 25 XIP-IWRC Length of counterweight ropes     4 each tower height plus 40' (12.2m) required   Location is:                      Athens, NY 12015 - USA The sale price includes a complete overhaul, so that the device is ready for immediate use. The device can also be painted at the customer's request. This would be charged at an additional €4500/ 5000 US$.

Rugged, American-Built Personnel/Material Hoists For Construction       Commerical High Rise      Power Generation Plants      Refineries and Chemical Plants      Shipyards BASE UNIT DESCRIPTION The following components are included in the base unit package.  Completely assembled enclosed cars with overspeed governor and safety brake, motor and all drive components 20ft of tower for zero lifting height Limit and control switches Buffer springs Counterweight frame with necessary weights Two-rope cathead assembly with idler sheaves Motor and car control panel with constant-pressure, hand-levercontroller Power cable guide assembly Base fence enclosure SPECIFICATIONS Cage capacity,.                            8000 Ibs Per Car (3629 kg) Passenger, max.                          40 Per Car Cage dimensions (inside). Length                                            14'-0" ft .- in. (4,26 m) Width                                              5'-7" ft .- in. (1,70 m) Height                                            7'-2" ft .- in. (2,18 m) Cage speed                                  Low Speed Min. 141-Max. 148, ft./min.                                                          High Speed Min. 282-Max. 297, ft./min. Electric service                           62.5 KVA PER CAR        480 V-60Hz-3 PH Full load current.                         65 amps /Car Braking torque.                            2@-175, ft./lbs /Car Brakes                                            Electromechanical multiple disc Total weight of base unit lbs.    38,500 (17.464 kg) Cage weight,.                               5,800 Ea. Ibs (2630 kg) Weight of counterweight,.        9,000 Ea. Ibs (4082 kg) Tower height, max..                    900 ft (274 m) Tower sections,                           60x28x56 inches (152x71x142 cm) Tower section weights, Ibs.      485 (220 kg) Tower tie-in intervals, tt.            30 (9,14 m) Counterweight wire rope6x25XIP-IWRC                 3,-in. Counterweight wire rope length required               4 x tower ht. plus 40 ft. (12,19m) Traveling power cable (6/#6 Type W)                        1 x tower ht. plus 30 ft (9,14 m) Stationary power cable (6/#4 Type w)                      1 x tower ht. plus 30 it. (9,14 m)    Location is:                                Athens, NY 12015, USA The sale price includes a complete overhaul, so that the device is ready for immediate use. The device can also be painted at the customer's request. This would be charged at an additional €4,500.  

Personnel/Material Hoists for Construction    Commercial High Rise   Power Generation Plants   Refineries and Chemical Plants   Shipyards Technical Datas: CAGE CAPACITY, LBS.                                      7000 PER CAR (3175 kg) PASSENGER, MAX.                                            35 PER CAR CAGE FLOOR DIMENSIONS (INSIDE FLOOR)  LENGTH                                                               14'-5"  (4,39 m) WIDTH                                                                  5’-0" (1.524 m) HEIGHT                                                                8'-1" (2,44 m) SQUARE FEET AREA (INSIDE)                         72.5 SQ/FT (72,5 m²) CAGE SPEED,                                                      VARIABLE MAX. 300 FT./MIN (91 m/min) ELECTRIC SERVICE                                         277/480 V-60Hz-3 PH (can change transformer to          run on 400 volts 50 Hz) TRANSFORMER REQUIREMENTS                  150 KVA 208 DELTA 480 Y FULL LOAD CURRENT AMPS.                         125 AMPS. PER CAR TOTAL CAR WEIGHT, LBS.                                6,750 EACH (3061 kg) WEIGHT OF COUNTERWEIGHT, LBS.           8,000 / CAR (3628 kg) MAST SECTIONS, INCHES (LxWxH)              30.5 x 30.5 x 59.375  (77,5*77,5*151 cm) MAST SECTION WEIGHTS, LBS. (1/4" WALL)         390 LBS. (177 kg) COUNTERWEIGHT WIRE ROPE 6 x 25XIP-IWRC OR 6 x 19XIP-IWRC                         5/8 INCH (1,6 cm) COUNTERWEIGHT WIRE ROPE req.LENGTH        4 X TOWER HT. PLUS 40 FT. . (12,19m) TRAVELING POWER CABLE (6/#6 TYPE W)            1 X TOWER HT. PLUS 40 FT. . (12,19m)   Location is:                        Athens, NY 12015 The sale price includes a complete overhaul, so that the device is ready for immediate use. The device can also be painted at the customer's request. This would be charged at an additional €4500/ 5000 US$.

SKYSAFE® Modular Suspended scaffolding provides a stable, secure platform for any work being performed on high-rise buildings, tall structures, and bridges. These sturdy yet lightweight platforms are recommended for window cleaning, brick and masonry restoration, painting, maintenance, inspection, and other suspended applications.   The platforms can be easily assembled in multiple configurations from 6’6″ (2 m) to 59′ (18 m). Built from extruded aluminum with galvanized steel-end stirrups, the SKYSAFE® platforms resist corrosion under the harshest environmental conditions. Additionally, SKYSAFE® modular platforms meet OSHA regulations and are UL classified for load capacities up to 1500 lbs.    Flexible: build your platform up to 59′ (18 m) long in modular sections of 1’8″ (0.5 m), 3’3″ (1 m), 6’6″ (2 m), and 9’10” (3 m). Cornering: add engineered corner sections or angles for working on tanks, bridge piers, or towers. Cantilever: use intermediate stirrups to extend the platform by up to 6’6″ (2 m) past the suspension point to access hard to reach corners. Speed: the platforms have very few parts and are fast to set up with block connectors and gravity pins. No tools required! Stability: for greater security while moving and working on the platforms. You can choose from two rigging-packages: Rigging Package - (cross braces, wire rope, power cord not included) Part Number and Description Qty MRBF - MR FRONT BEAM (RBC1040B)       2 MRBM - MR EXTENSION BEAM (RBC1070B)       2 MRBR - MR REAR BEAM (RBC1050B)       2 MRS - MR STD FRONT FRAME (RBC1010B)       2 MRSBP - MR FRONT BASE PLATE (RBH1070D)       2 OBSF4 - PSC OUTRIGGER BEAM FR       8 TH014 - PSC COUNTER WEIGHT 80            Or PSC Outrigger Package (cross braces, wire rope, power cord not included) Part Number and Description Qty TH024 - PSC OUTRIGGER BEAM ALUM 2 PCS       2 TH243 - PSC OUTRIGGER BEAM CWT HNGR       2 OBSF4 - PSC OUTRIGGER BEAM FR       8 TH014 - PSC COUNTER WEIGHT 80             CHOOSE 1 OF 2 OPTIONS for PLATFORM & HOIST PACKAGES Platform Package - No Cantilever Part Number and Description Qty MODKD3D - MOD KD DECK 3M 2 MODKD3SP - MOD KD SIDE PANEL 3M       4 MODKD1D - MOD KD DECK 1M 1 MODKD1SP - MOD KD SIDE PANEL 1M       2 MODKD2D - MOD KD DECK 2M 1 MODKD2SP - MOD KD SIDE PANEL 2M       2 MODKDUF - MOD KD U-FRAME CENTER       3 MODSEU - MOD STIRRUP END UNIVERSAL       2 ETH35XH - PS 35 SATURN ELEC 220V       2  Or  Platform Package - W/ Cantilever Part Number and Description Qty MODKD3D - MOD KD DECK 3M 2 MODKD3SP - MOD KD SIDE PANEL 3M 4 MODKD1D - MOD KD DECK 1M 1 MODKD1SP - MOD KD SIDE PANEL 1M 2 MODKD2D - MOD KD DECK 2M 1 MODKD2SP - MOD KD SIDE PANEL 2M 2 MODKDUF - MOD KD U-FRAME CENTER 3 MODSHC - MOD HALF C-STIRRUP 2 MODSEGU - ENDGATE 2 ETH35XH - PS 35 SATURN ELEC 220V 2      Sale Pricing (USD)   Rigging + Platform Only Complete Package Price ( 2xOR, 1 platform, 2x Hoists) Sky Beam+ No Cntlvr $2,400 $7,400 Sky Beam+ W Cntlvr $2,600 $7,600 PCS+  No Cntlvr $2,000 $7,000 PCS+  W Cntlvr $2,200 $7,200  

Le premier treuil de traction triphasé homologué UL, d'une capacité de 2 200 lb, pour les vitesses élevées guidées (GHS) en Amérique du Nord, augmente la productivité, le temps de fonctionnement et la sécurité pour les ascenseurs et autres applications de levage lourd.     Ø  Capacité de levage élevée, vitesses de déplacement variables et plage de puissance la meilleure du secteur Ø  Sécurité de l'opérateur garantie grâce à un dispositif de surcharge intégré, un verrouillage de sécurité contre la survitesse (OSL) monté à l'extérieur et un verrouillage de sécurité contre l'inclinaison (ISL) en option Ø  Auto-sauvetage des travailleurs et des plates-formes grâce à la fonction de descente contrôlée Ø  Gestion optimale de l'énergie et démarrages et arrêts en douceur grâce à un variateur de fréquence (brevet en instance) Ø  Disponibilité maximisée grâce à l'assistance inégalée du plus grand réseau de succursales du secteur.     Spécifications UpPro P1009 GHS   Capacité › 2 200 lb (1 000 kg) Vitesse de déplacement › jusqu'à 60 pi/min (18 m/min) Alimentation › 230 V +10 %, -20 % ; 60 Hz, triphasé Intensité à la limite de charge de travail › 12 ampères Câble métallique › ⅜ po (9,5 mm) avec une résistance à la rupture de 15 100 lb (6 849 kg) Poids › Palans et OSL : 161 lb (73 kg) › Palans, OSL et ISL : 180 lb (81,5 kg) Dimensions › 20 po (508 mm) de largeur et 38 po (965 mm) de hauteur entre le haut du support et le bas du montage   Pour plus d'informations, veuillez télécharger la brochure ici : Spider® UpPro – P1009 GHS

QuikDeck est une plateforme d'accès suspendue haute performance qui peut être montée rapidement et assemblée sous presque toutes les formes et tailles. QuikDeck permet de travailler sans interruption, par exemple lors de rénovations de ponts, salles, arènes, stades, etc. Il n'y a généralement pas besoin de fermetures. Travailler en toute sécurité ·                Environnement de travail clair et sans trajets grâce à des surfaces propres et lisses ·                Une plateforme complètement fermée empêche les objets de tomber ·                Tous les composants sont équipés de poignées et peuvent être attachés ·                Les composants pivotants vers l'extérieur assurent une érection sûre depuis le bord d'attaque ·                Assemblage facile et rapide sans outils spéciaux ·                Le panneau composite peut être recyclé et est léger, ignifuge, résistant aux intempéries et aux UV Travail productif ·                Installation en l'air ou au sol ·                La conception modulaire et les solives réglables permettent d'ériger presque toutes les tailles et formes de structures ·                Vitesse d'assemblage élevée due au faible nombre de composants ·                Un panneau composite léger réduit encore le temps d'installation ·                Moins de transport grâce à une réduction de poids de 50 % ; Émissions réduites ·                Moins de points d'attache, donc moins d'obstructions et d'interférences ·                Les conditions de travail sur le terrain d'usine garantissent une productivité accrue ·                Capacité de charge jusqu'à 300 kg/m2 (classe de charge 4) en configurations standard

Whether scaffolding elements, tools or other construction materials: The GEDA MH 660 is the compact and robust partner for efficient material transport at construction sites. The lightweight aluminium mast elements can be assembled by one person. The convenient loading and unloading ramp ensures comfortable access to the platform, which is approved for transporting up to 660 lbs (300 kg). Once at the landing level, the car of the GEDA MH 660, which can be swivelled by 90 degrees, allows a safe transition and comfortable loading and unloading. UL Listed Electrical ComponentsQuick InstallationDesigned for Scaffold ErectionRotating PlatformGerman EngineeredAluminum Mast System Compatible with GEDA MH 660 Boiler Hoist   Load up to: 660 lbs – 300 kg Height up to: 165 ft – 50 m Lift speed up to: 65 ft/min – 20 m/min Power: 2.4 hp/240 V/60 Hz/11 A Item Number Description Quantity 100HM Hoist Material 1 MH-D1226 GD CABLE BIN W/ 160' CABLE 1 MH-D1263 GD WALL TIE TUBES (2) 32 MH-GD01043 GD 850Z LOAD PLATFORM "A 1 MH-GD01748 GD ALUM MAST 6'6" W/ SCREWS 34 MH-GD01765 GD MAST TIE 16 For additional information please go to: MH 660 Temporary Material Hoist | GEDA - USA GEDA_Brochure_MH660_02112021_US_FINAL_LowRes.pdf

The GEDA TP 4400 has two separate control systems and can be used either as a material hoist only or as a transport platform for passengers and materials. The transport platform control with a speed of 40 ft/min is activated for transporting passengers and materials. For transporting construction materials only, the device is switched to the material hoist mode with a lifting speed of 80 ft/min. One device, numerous possibilities: the double-mast GEDA TP 4400 transport platform ideally adapts to virtually any conditions on site thanks to the convenient modular system with different platform versions and different load capacities. The large loading platform variants of the GEDA TP 4400 offer plenty of space – even for transporting particularly heavy and bulky materials. Despite high load capacities of up to 4400 lbs, the proven double mast system ensures a stable and smooth travelling motion.      Quick Installation     Transport of Persons and Material     GEDA UNI-X-MAST     Code Compliance ANSI A92.10     Modular Design     Variable Platforms Available     German Engineered   Load up to:       4400 lbs – 2.000 kg      7 persons Height up to:    330 ft – 100 m Lift speed up to: 40-80 ft/min – 12-24 m/min Power:                2 x 4.8/9.7 hp/480 V/ 60 Hz/30 A   Item Number Description Quantity VGTP4400B 4400 TP BASE UNIT 1 VGTP4400B2 4400 TP PLATFORM "B2" STYLE 1 VGTP4400CB 4400 TP CABLE BIN 1 VGTP4400MT 4400 TP MAST TIES (2 PC SET) 16 VGTP4400M5CS 4400 TP UNIMAST 5' W CAPSCREW 45 VGTP4400RP 4400 TP ROOF PLATFORM (ALUMIN 1   For additional information please go to: TP 4400 Transport Platform - Large Material Transport Platform | GEDA - USA GEDA_Brochure_TP4400_02112021_US_FINAL_LowRes.pdf

The GEDA TP 1100 transport platform has been specifically designed for use in tough building site conditions and is extremely flexible. With two separate controls, it can be used simply as a material hoist or as a transport platform for passengers and materials. A lifting speed of 80 ft/min in material mode and 40 ft/min in passenger mode ensures rapid construction progress. The TP 1100 transport platform is an indispensable aid for rapid assembly of scaffolding as well as for the subsequent work at the construction site. With minimal space requirements, high load capacity and various application options, the construction hoist saves time and ensures optimum logistics processes on site. Every construction site has its own challenges. Different platform versions with different loading doors and flaps therefore allow optimum adaptation of the GEDA TP 1100 to the requirements on site. The spacious loading platform without cover provides sufficient space for all types of construction materials.   Load up to:       1100/1875 lbs  - 500 /850 kg 4 persons Height up to:    330 ft – 100 m Lift speed up to: 40/80 ft/min – 12-24 m/min Power:               4/8 hp/480 V/60 Hz/16 A   Item Number Description Quantity VGTP1100B 1100 TP BASE UNIT 1 VGTP1100C 1100 TP PLATFORM "C" STYLE 1 VGTP1100CB 1100 TP CABLE BIN 1 VGTP1100MT 1100 TP MAST TIES (1 PC SET) 11 VGTP1100R 1100 TP ROOF (ALUMINUM) 1 VGTP1100RLD 1100 TP RACK LUBRICTNG DEVICE 2 VGTP1100SDS 1100 TP SELF DIAGNOSTIC SYSTEM 2 VGTP1100ASD 1100 TP SELF DIAGNOSTIC SYSTEM 2   For additional information please go to: TP 1100 Material Transport Platform | GEDA - USA

New and used units available The P-Series mast climbing platform is the perfect tool for smaller jobs that require high capacity or for restrained work area where most  climbing work platforms can't fit, whether for new construction or restoration. With its high load capacity (6,000 lbs/2700kg at 28'/8,5m length ) to size ratio, it is ideal for multi-residential or small commercial masonry jobs between 15'/4,5m and 100'/30,5m in height. High Speed  Fast two-person hand assembly of platform up to 28' (8,5 m) wide. High-Tech  6000 lb/2700 kg load capacity provided by innovative hydraulic system. High on Safety Expandable up to a 7'/2,1m wide work area, reducing risk of injury. High Efficiency Platform can fit in a 36"/11m opening.   The P-Series mast climbing work platform offers an attractive price/performance ratio. It is extremely portable and set up is both easy and very quick. In addition, this work platform is adaptable to angle configurations and boasts a 10 ft/3 m per minute climbing rate. By reducing labor costs and set-up time, the P-Series can contribute to an estimated 30% increase in productivity. High capacity-to-size ratio Allows single- and twin-mast configurations, which most smaller platforms can't accommodate Quick assembly can be carried out by only two people Highly portable Easy and minimal maintenance   New Hydromobile P-Series units available - contact us for pricing and specifications. Wide selection of used Hydromobile P-Series units available - reach out for current inventory and details. International Sales of New Equipment are subject to territorial guidelines and restrictions on importation back into the U.S. and/or Canada. For additional information please go to: Mast climber scaffold for small job & restrained area | Hydro-Mobile