One package of 1x Euro Lattice Box + 50x TOPMAX stopend angle

One package of 1x Euro Lattice Box + 1.500x Clamp

One package of 1x Euro Lattice Box + 100x Clamp

One package of 1x Euro Lattice Box + 80x Clamp

One package of 1x Euro Lattice Box + 800x COUNTER NUT AS 350DB 410DB

One package of 1x Euro Lattice Box + 15x Uni tripod

One package of 1x Euro Lattice Box + 100x Fork Heads 8/20

Fork head 8/20 – for edge and middle yokes

Incl. 1 lattice box

Safety of H 20 beams arranged on the support head plate when using a central bend

Maximum load capacity: 24.00 kN

Depending on the pipe diameter of the steelror support, a T-bolt is required, the bolt is used for failover.

Weight: 2.96 kg

15 tripod stands incl. 1 lattice box

Tripod stand makes it easier to set up the supports

The tripod stand may only be used as an installation aid. It does not replace the necessary measures for dissipating the H loads from the formwork, wind, concreting process, etc. into the structure of the building.

Tripod stand Weight per one: 11,83 kg

1 x Lattice Box incl.

The package consists of 200 bracing clamps.
Attaches stiffening shutterboards to any tubular steel props.

The package consists of 10 column walers.

For production of right-angled formwork halves with various dimensions for column formwork.

1 x lattice box incl.

The package consists of 40 HT table heads.
Steel props are mounted to the table by using the HT table heads. All connecting parts are integrated. A plastic cap arrests the locking steel wedges during transportation without steel props. In this way, damage to the plywood sheet is avoided when stacking the floor tables.