Second-hand Package ID15 - 12 pcs. a 6,76-7,09 m hight

Pickup from Yard, net value

€13,950.00

Content: 12 Piece

delivery time 1-2 weeks

Request this product

Offer number:	DE057162
Storage location	Deutschland, Österreich
Condition:	second hand

Didn't find the right configuration?

Ask for other variants.

Product information "Second-hand Package ID15 - 12 pcs. a 6,76-7,09 m hight"

Second-hand package with 12 shoring towers ID15 with a hight of 6,76-7,09 m each
consist of:

pos.	item No.	description	item	weight
			sec. Hand	in kg
1	148530	ID 15 head jack 38/52	48	393,600
2	148552	ID 15 base jack 38/52	48	400,224
3	57162	ID 15 frame 133	96	1.809,984
4	57173	ID15 Frame 100	24	381,048
5	118163	ID 15 end frame 10	24	376,080
6	148574	ID 15 Diagonal	120	336,960
7	78652	ID 15 base jack retainer	48	2,448

The Hünnebeck ID15 Frame Support is a support tower system with base dimensions of 1.0 m x 1.0 m. By using only 6 standard components every required height can be achieved. Depending on the height, towers can be assembled with Frames 100, Frames 133 or combinations of these frames and with supplementary components.

Towers of any height can be erected without steps utilising the combined adjustment range of the Head Jack and Base Jack, wich exceeds the 33 cm grid of the frames. All component parts are robust and hot-dip galvanized. The self weight including Head and Base Jacks is approximately 42 kg/vertical meter.

The bearing plates of the Head and Base Jacks are articulated and allow adaptations to slopes of up to 6%.

In total the full adjustment range of the jacks are 59.8 cm.

Both Frames (100 and 133) use the same type of diagonal for bracing. When stacking frames on top of each other, the orientation of the standard frames is shifted by 90° from lift to lift ensuring the same rigidity of the ID15 tower in both directions.

The connection of the standard frames are tension-proof due to the built-in quick-action connectors.

The vertical leg is made of tubular steel with an outside diameter of 48.3mm and therefore allows the connection of standard scaffolding tubes and couplers. When the ID15 Towers are properly horizontally braced and anchored, almost any height can be achieved.

Horizontal assembly

The design of the individual components allows the ID15 towers to be assembled in horizontal position. Even tall towers can be assembled quickly and time-savingly this way and then lifted and transported to the location of use by the help of a crane.