TOPEC 180x120
NEW: TOPEC® 180/120
The perfect system addition for your existing TOPEC® system
2.16 m² per panel
Easily integrated into the existing element grid
With the TOPEC® modular slab formwork from Hünnebeck, erecting and striking slabs is significantly faster and demonstrably more economical than with conventional slab formwork systems.
Further Information
new
TOP'UP Lift
TOP'UP Lift
incl. 2 batteries & chargerEven large panels can easily be
placed on the TOPEC TOP'UP Lift
and raised or lowered without
force using a hydraulic cylinder.
Ergonomic and fatigue-free raising and lowering using the pneumatic jackConsistent speed during shuttering and strikingBattery-operated, with no power cables to impede movementEquipped with remote control for safe operationAutomatic panel locking systemEasy to move thanks to 4 large swivel wheels
TOPEC TOP‘UP Lift is already assembled upon delivery and can be used right awayUsage for up to 3.85 m and 4.35 m clear room heightCompatible with the TOPEC Panels 180/180, 180/90 and 180/75Less staff required
Further Information
new
H-Loading Platform 5 800/290
The Loading Platform 5 800/290 helps to safely transport construction materials on
construction sites. It is pre-assembled with minor adjustments possible both horizontally
and vertically using the integrated crane attachment points. The Loading Platform is mounted on the outside of the building. The loading area
protrudes from the building and offers a safe storage area of approx. 10.00 m2 which
can be used to transport materials in and out of the building at floor level. Panel railings that prevent items and persons from falling off the platform ensure a safe
working environment when working on the platform. The platform surface is made of
slip-resistant corrugate plates.The Loading Platform is used to transport materials on site. It can be used in floors with
a clearance of 1.90 m to 5.90 m. It can support up to 5,000 kg distributed across the
entire surface.
Further Information
second hand
Prop 15-300 (GW)
1x stacking frame incl.
The package consists of 48 Prop 15-300
Low dead weight (11kg)
Long-term value preservation thanks to high-quality production and galvanizing
Crushing and fail-safe
Further Information
second hand
RASTO G2 Extension set ceiling
RASTO G2 Extension set ceiling with XXL board as edge ceiling table.
One package of:
603442 TOPMAX Head Adapter 24x
602596 TOPMAX FOLDING HEAD 24x
603067 TOPMAX Locking Pin 24x
603123 TOPMAX Post Fastener 12x
479264 CENTERING TENSION BOLT 26x
469566 CENTERING NUT 100 38x
601225 PROTECTO RAILING POST 8x
601440 STEEL PROP EUROPLUS new 30-300 24x
604730 PROTECTO Pritective Grille 2,40m 3x
506430 Wall Strut, Size 3 (270-340 cm) 6x
603050 TOPMAX-crane suspension 4x
603235 TOPMAX Timber Holder 12x
548480 EURO LATTICE BOX 1x
553689 EURO STACKING FRAME 120/80 1x
To learn more, please check our user guide.
Further Information
new
TOPMAX working platform 1.8
The package consists of 1 working platform.
The Topmax working platform provides a safe working platform. It is a pre-assembled safe working platform with foldable edge protection. It can be used to provide additional access area to Topmax floor tables.For more information refer to our user guide.
Further Information
second hand
TOPMAX working platform 2.4
The package consists of 1 working platform.
The Topmax working platform provides a safe working platform. It is a pre-assembled safe working platform with foldable edge protection. It can be used to provide additional access area to TOPMAX Floor Tables.For more information refer to our user guide.
Further Information
second hand
TOPMAX extension frame
The package consists of 5 Topmax extension frames.
The Topmax extension frame is used at building sites with greater slab heights of up to 7.62 m (clear floor height). The frame enables the re-use of props for typical lower areas in the non-typical higher areas without exchanging the entire falsework system.For more information refer to our user guide.
Further Information
second hand
Prop 15-300 (GW)
1x stacking frame incl.
The package consists of 50 Prop 15-300
Low dead weight 11kg
Long-term value preservation thanks to high-quality production and galvanizing
Crushing and fail-safe
Second hand
Further Information
second hand
Package of joist clamping connector and adjustable fixing beam 500
Package consisting of 1x 60 pieces of joist clamping connector incl. 1 lattice box and 1x 60 adjustable fixing beam 500 incl. 1 lattice box
Joist clamping connector: The galvanized Joist clamping connector enables the forming of beams with H 20 carrier or R24carrier. It is simply clamped onto the top chord of the carrier without a grid. Maximum ceiling load per joist clamping connector: 6.5 kN
adjustable fixing beam 500
The galvanized adjustable fixing beam 500 ensures the height adjustment of a beam formwork with a Joist clamping connector.
Weight: Joist clamping connector 6.50 kg; adjustable fixing beam 500 4.54 kg
Further Information
second hand
With slab formwork from BrandSafway, you can form any type of slab quickly and safely. Depending on the application, choose between timber beam formwork, modular slab formwork, and slab tables. One of the main advantages of slab formwork is its flexibility and adaptability. It can be easily adapted to various slab shapes and sizes, allowing for a customized solution for every construction project. Buy used slab formwork, ideally directly from the manufacturer, i.e. from us. It's a good decision.
Used and new slab formwork directly from the manufacturer
If you purchase used slab formwork directly from the manufacturer, you're on the safe side, because the quality of the used material has been tested. Another advantage: accessories or system elements can be purchased if necessary. If you are looking for a reliable and professional slab formwork solution, our experts are happy to assist you.
Further information can be found here:
Slab formwork: Efficient and safe solutions for slabs