Filter
RASTO G2 Extension set ceiling
RASTO G2 Extension set ceiling with XXL board as edge ceiling table.
One package of:
603442 TOPMAX Head Adapter 24x
602596 TOPMAX FOLDING HEAD 24x
603067 TOPMAX Locking Pin 24x
603123 TOPMAX Post Fastener 12x
479264 CENTERING TENSION BOLT 26x
469566 CENTERING NUT 100 38x
601225 PROTECTO RAILING POST 8x
601440 STEEL PROP EUROPLUS new 30-300 24x
604730 PROTECTO Pritective Grille 2,40m 3x
506430 Wall Strut, Size 3 (270-340 cm) 6x
603050 TOPMAX-crane suspension 4x
603235 TOPMAX Timber Holder 12x
548480 EURO LATTICE BOX 1x
553689 EURO STACKING FRAME 120/80 1x
To learn more, please check our user guide.
Further Information
Condition: new
RASTO G2 Starter set
55 m² RASTO G2 wall forwork with all-plastic facing and anchoring on one side.
One package of:
607330 RASTO G2 Panel 90/270 10x607340 RASTO G2 Panel 75/270 6x607350 RASTO G2 Panel 60/270 4x607360 RASTO G2 Panel 45/270 6x607370 RASTO G2 Panel 30/270 2x607430 RASTO G2 Inner Corner 30/270 2x489000 R-ALIGNING PANEL CLAMP N 40x488910 R-ADJUSTABLE ALIGNING CLAMP 10x606300 RASTO bulhkead clamp 4x602645 RASTO clip 10x607550 RASTO TransportHook G2 2x408780 MANTO RATCHET 1x564381 RASTO ADJUSTINGSTRUT 5x488900 RASTO OUTER CORNER CLAMP N 6x607210 RASTO Front Tie Nut 40x607220 RASTO Rear tie Nut 40x607250 MR Tie Rod DW15 40x548480 EURO LATTICE BOX 2x553689 EURO STACKING FRAME 120/80 1x
To learn more, please check our user guide.
Further Information
Condition: new
ST 60 Package 1
ST 60 Package 1 for base area: 1,13m x 1,13m and superstructure height: 5,37m to 6,47m.One package of:652430 ST 60 Base Jack 60 4x652450 ST 60 starter frame L 4x652380 ST 60 entry frame 113/100 1x652350 ST 60 frame 113/100 19x652520 ST 60 alu deck 113/31 1x652530 ST 60 alu deck 113/68 1x652419 ST 60 head jack retainer 4x652355 ST 60 head jack 60 4x652366 ST 60 deck lifter 1xFor more information go to our user guide.
Further Information
Condition: new
ST 60 Package 2
ST 60 Package 2 for base area: 1,13m x 1,50m and superstructure height: 5,37m to 6,47m.
One package of:
652430 ST 60 Base Jack 60 4x
652450 ST 60 starter frame L 4x
652380 ST 60 entry frame 113/100 1x
652290 ST 60 frame 150/100 10x
652350 ST 60 frame 113/100 9x
652530 ST 60 alu deck 113/68 2x
652419 ST 60 head jack retainer 4x
652355 ST 60 head jack 60 4x
652366 ST 60 deck lifter 1xFor more information go to our user guide.
Further Information
Condition: new
ST 60 Package 3
ST 60 Package 3 for base area: 1,50m x 1,50m and superstructure height: 5,37m to 6,47m.
One package of:
652430 ST 60 Base Jack 60 4x
652450 ST 60 starter frame L 4x
652390 ST 60 entry frame 150/100 1x
652290 ST 60 frame 150/100 19xFor more information go to our user guide.
652500 ST 60 alu deck 150/68 2x
652419 ST 60 head jack retainer 4x
652355 ST 60 head jack 60 4x
652366 ST 60 deck lifter 1x
Further Information
Condition: new
RASTO G2 Extension set XXL
RASTO G2 Extension set with almost 40 m² of XXL panels.
One package of:
607470 RASTO G2 Panel XXL 240/270 6x
489000 R-ALIGNING PANEL CLAMP N 12x
564381 RASTO ADJUSTING STRUT 3x
601225 PROTECTO RAILING POST 4x
606245 RASTO P-walkway bracket 4x
604730 PROTECTO Protective Grille 2,40m 3x
To learn more, please check our user guide.
Further Information
Condition: new
RASTO G2 Safety set
Perfectly matched for the RASTO G2 Starter set. Protection of 10 running metres of formwork.
One package of:
606245 RASTO P-walkway bracket 6x
601225 PROTECTO RAILING POST 6x
604730 PROTECTO Protective Grille 2.40m 4x
To learn more, please check our user guide.
Further Information
Condition: new
RASTO Clip
One package of 1x Euro Lattice Box + 1.500x ClampTo learn more, please check our user guide.
Further Information
Condition: new
TOPMAX working platform 1.8
The package consists of 1 working platform.
The Topmax working platform provides a safe working platform. It is a pre-assembled safe working platform with foldable edge protection. It can be used to provide additional access area to Topmax floor tables.For more information refer to our user guide.
Further Information
Condition: second hand
TOPMAX working platform 2.4
The package consists of 1 working platform.
The Topmax working platform provides a safe working platform. It is a pre-assembled safe working platform with foldable edge protection. It can be used to provide additional access area to TOPMAX Floor Tables.For more information refer to our user guide.
Further Information
Condition: second hand
TOPMAX extension frame
The package consists of 5 Topmax extension frames.
The Topmax extension frame is used at building sites with greater slab heights of up to 7.62 m (clear floor height). The frame enables the re-use of props for typical lower areas in the non-typical higher areas without exchanging the entire falsework system.For more information refer to our user guide.
Further Information
Condition: second hand
TOPMAX stopend angle
One package of 1x Euro Lattice Box + 50x TOPMAX stopend angleTo learn more, please check our user guide.
Further Information
Condition: new
Alignment Strut K600
One package of 1x 120/80 Stacking frame + 28x StrutTo learn more, please check our user guide.
Further Information
Condition: second hand
Alignment Strut P330
One package of 1x 120/80 Stacking frame + 55x Strut
To learn more, please check our user guide.
Further Information
Condition: second hand
R-Adjustable aligning clamp
One package of 1x Euro Lattice Box + 100x Clamp
To learn more, please check our user guide.
Further Information
Condition: new
MANTO concreting platform
Manto concreting platform
A complete 1.20m wide stage with decking and side protection in the system length of 2.40m. After setting up the folding railing, the concreting platform can be hung onto the MANTO formwork using a crane. The platform is secured against lifting by an automatic safety device.
Pouring platforms are delivered folded. The stacking height is 400mm for the lower platform and 200mm for the other platforms à see document Stacking concrete platforms.
Weight: 140,79kg
Attention! Small repairs and cleaning must be carried out!
Further Information
Condition: second hand
Tripod stand
Tripod stand makes it easier to set up the supports
15 tripod stands incl. 1 lattice box
The tripod stand may only be used as an installation aid. It does not replace the necessary measures for dissipating the H loads from the formwork, wind, concreting process, etc. into the structure of the building.
Tripod stand Weight per one: 11,83 kg
Further Information
Condition: second hand
Prop 15-300 (GW)
1x stacking frame incl.
The package consists of 50 Prop 15-300
Low dead weight 11kg
Long-term value preservation thanks to high-quality production and galvanizing
Crushing and fail-safe
Second hand
Further Information
Condition: second hand
Takko 1,2m 144m² with all accessories included
Technical Data
Panel heights: 120 | 150 | 270 | 300 cm
Panel widths: 30 | 45 | 50 | 55 I 60 | 65 I 75 | 90 | 240 cm
Profile thickness: 12 cm galvanized steel frame profile
Form lining: 14mm plywood (min. 280 g/m² coating)
Average weight: 40 kg/m² (including connection parts)
Max. concrete pressure: 60 kN/m² (line 6)
Assembly/stripping times t = 0.4 – 0.6 h/m²
Versatile
Highly versatile wall formwork system with the same connection elements for every project size
RASTO multi-purpose panels for easy forming of columns and corners
Strong and durable
Longer service life due to the robust, galvanized steel frame profile with 12 cm thickness
Easy handling
The easy-to-use outer corner clamp makes an outer corner out of two standard panels
The adjustable aligning clamp permits adjustments up to 15 cm and flush, force-fit connections
Economical
Craneless forming possible due to low weight of basic RASTO and TAKKO panels
RASTO aligning clamps provide a strong, tight and flush panel connection in just oneworking step
Learn more by reading our user guide.
Further Information
Condition: second hand
Package of joist clamping connector and adjustable fixing beam 500
Package consisting of 1x 60 pieces of joist clamping connector incl. 1 lattice box and 1x 60 adjustable fixing beam 500 incl. 1 lattice box
Joist clamping connector: The galvanized Joist clamping connector enables the forming of beams with H 20 carrier or R24carrier. It is simply clamped onto the top chord of the carrier without a grid. Maximum ceiling load per joist clamping connector: 6.5 kN
adjustable fixing beam 500
The galvanized adjustable fixing beam 500 ensures the height adjustment of a beam formwork with a Joist clamping connector.
Weight: Joist clamping connector 6.50 kg; adjustable fixing beam 500 4.54 kg
Further Information
Condition: second hand
Column waler 123/123
The package consists of 10 column walers.
For production of right-angled formwork halves with various dimensions for column formwork.
Further Information
Condition: second hand
Uni tripod
One package of 1x Euro Lattice Box + 15x Uni tripod
Further Information
Condition: second hand
Adjustable aligning clamp
One package of 1x Euro Lattice Box + 80x clamps
Further Information
Condition: new
HT table head
1 x lattice box incl.
The package consists of 40 HT table heads.Steel props are mounted to the table by using the HT table heads. All connecting parts are integrated. A plastic cap arrests the locking steel wedges during transportation without steel props. In this way, damage to the plywood sheet is avoided when stacking the floor tables.
Further Information
Condition: second hand